Skip Navigation Website Accessibility
 
Curbside and In-Store Pickup Available

 
Call Today (403) 320-9700

 


Embellish Stabilizer - Bold Tearaway (20" X 10yds)

Embellish® Bold Tearaway is a tightly woven, heavy duty, stabilizer made using a unique “Non-Woven” technique, and it is used to support large or dense embroideries on stable woven fabric such as: cotton, duck cloth, twill, and denim. It features a multi-directional tear capability, easily pulling away clean from the embroidery design for a crisp look on the front and back. It is also available in a fusible version. Embellish® Bold Tearaway is recommended to be used as a “floater” under the hoop when used in conjunction with Embellish® Fusible Bold Tearaway that has been ironed to the back of woven fabric. Adding a “floater” of Embellish® Bold Tearaway adds additional support to the fabric when using a design that has more than 12,000 stitches in a 4”x4” hoop

Made in America. Premium tearaway fibers using the Wet-Laid Non-Woven Process. 2 oz


Stitch Count
Holds up to 12,000 embroidery stitches in a 4”x4”

To Use

  1. Cut a “floater” piece at least one inch larger than the outer perimeter of the embroidery design to ensure proper stabilization.
  2. Hoop the material along with the fused Embellish® Fusible Bold Tearaway, making sure the material and stabilizer are taut.
  3. If the design has more than 12,000 stitches in a 4” x 4” hoop then “float” a piece of non-fusible Embellish® Bold Tearaway under the hoop for added support.
  4. Add an embroidery topper on top of the hooped material (either Embellish® Rinse-Away Clear Topper or Embellish® Iron-Away Clear Topper).
  5. Embroider the design.
To Remove

Remove the material from the hoop. Remove the topper following the topper product sheet found in this workbook.
Hold your fingers over the bobbin thread and tear away as much of the stabilizer as possible, starting with the “floater.”
If the iron temperature was too hot during the fusing process of the Embellish® Fusible Bold Tearaway, it might be necessary to re-heat the stabilizer using a Silk Setting for it to release from the material.

Laundering and Care
Launder and dry the item according to the fabric material fiber content.

Contact Info

1416 - 2nd Ave South
Lethbridge, AB

403-320-9700
info@sewinglane.com

Business Hours

Monday          10:00 - 5:00 pm
Tuesday         10:00 - 5:00 pm
Wednesday    10:00 - 5:00 pm
Thursday        10:00 - 5:00 pm
Friday              10:00 - 5:00 pm
Saturday         10:00 - 4:00 pm **
         * * unless otherwise posted 

CLOSED GOOD FRIDAY
MARCH 29
           
Sunday - Closed
Closed Stat Holidays

Get Directions  |  View Our Services