A Button Sewing foot is used to easily attach buttons by machine. The foot securely holds the button in place, while still
providing a clear view of the stitching area. In addition, the horseshoe-shaped rubberized grip keeps the button from slipping out of place.
The Button Sewing Foot can also be used to attach ribbons, to tack trims in place and even sew on the hook and eye closures.Sewing with the Button Sewing Foot.

NOTE: This foot may be compatible with a number of machine brands

1. Attach the button sewing foot to the presser foot holder. Depending on your machine model either cover or lower the feed dogs. (Consult your machine manual)

1. Position the button under the presser foot and lower the foot, holding the button in place.
2. Select a zig-zag stitch or depending on your machine, select a button to sew a stitch. (consult your machine manual). Adjust the stitch width so that the left swing of the stitch drops into the right hole of the button.
3. With the needle threaded and the button positioned on the right side of your fabric under the foot, stitch 5-8 zig-zag stitches to secure the button. To tie off select a straight stitch and adjust the stitch length to 0, also adjust the needle position so that the needle drops into the left hole of the button. Stitch in place 5 times to secure the thread.
Trim the thread tails. Repeat for each button
4. shank is needed for the button, place a toothpick or match under the button when stitching the button on.